Hardware compatibility issues
Drives which perform frequent head unloads under Linux
How to determine whether a machine has this problem
Many drives make small clunking noise when they unload and/or reload their heads, so if you hear such noise frequently (say, several times in a minute), it would be worth investigation. Drives usually implement Start_Stop_Count or similarly named counter in their SMART attributes which can be accessed by running "smartctl -a /dev/[hs]dX" where /dev/[hd]dX" is the drive in question. If the counter is too high compared to the hours the drive has been running (which is also often available in the SMART output), your hardware is likely to have this problem.
Known affected devices
This list is far from complete. If you have a hardware affected by this problem, please write to linux-ide and attach the outputs of "dmidecode" and "hdparm -I /dev/[hs]dX" where dev/[hs]dX is the affected drive.
- Lenovo ThinkPad T60 w/ Hitachi drives
- HP Pavilion dv6500 Notebook PC
- HP Pavilion dv9500 Notebook PC
- Dell e1505
- Western Digital Green Drives
- WD5000AACS, WD7500AYPS, WD1000FYPS
- workaround: Requires vendor specific tool wdidle3.exe to change the configuration. The tool can only be obtained via WD support.
- Dell Vostro 1400
- Samsung Q45
- Mac mini 1,1
- Acer Aspire 1691wlmi
storage-fixup is a script which uses dmidecode and hdparm outputs to match blacklisted devices and execute appropriate workaround. The script should be run early during the boot and while the system is coming out of sleep. Please read comments on top of the script and the configuration file.
There is a known hardware issue when libata is used with certain TSSTcorp TS-L623D drives. The user might experience random system freezes for a few minutes periodically. The problem mostly occurs on Acer and Asus laptop computers.
Affected firmware versions
- Acer: All firmware versions including AC00 and AC01
- Asus: All firmware versions including AS05 and AS99
- Samsung: SC02
Good firmware versions
- keep a CD in the TS-L632D drive or
- kill the hald-addon-storage process or
- cross-flash the drive firmware of TS-L632D to the SC03 version.
How to cross-flash
Be warned that you are at your own risk to cross-flash the firmware of the drive. Also it might void the warranty.